Spiral Hoses with Connectors
Spiral hoses with complete connections at both ends and with anti knik device. Hose of polyamide (PA) blue. Maximum working length approx. 80% of the overall length. Non-kinking, resistent to reduction of inside diameter.
Spiral Hoses-Polyurethane (PU)
with complete connections at both ends, maximum working length approx. 80% of the overall length, non-kinking, less rubbing off than polyamide hoses, soft surface less scratching-danger of sensitive surfaces.
Plastic Hoses
Plastic hoses without reinforcement.
Minimum quantity: 10 m.
Material: polyethylene, polyamide 11.
PVC hose for compressed air
in extruded version. According to DIN 20018 for rough conditions of use. Resistant against water- and mineral oil-containing compressed air. Flexible, non-bending, abrasion-resistent and weather-proof.
PVC Hoses converted for compressed air
Mounted with brass couplings and plugs DN 7,2, with woven fabric inlay, flexible, water-clear, UV-resistent, unlimited storage life.
Garage-wall holder
Light-alloy casting (in one peace cast).
Extreme stable, solid construction and manufacture..
2-Ear-Clamps for compressed air PVC-hoses
2-Ear-clamps with inner ring of steel for compressed air PVC-hoses. They are usually used where a low overall height and a small stretching area are important. 2-Ear-Clamps are suitable for maintenance, repair and service. With this type of clamps hoses, cables and other materials can be tied safely.
For proper sealing the "ear" has to be closed correctly onassembly.
Teflon sealing band
DVGW approved and BAM tested
Special Air Oil
Compressed air special oil for lubricators and maintenance units according to DIN 51 524 - 2 with viscosity class VG 32 according to ISO 3448 (viscosity at 40°C - 32mm²/s;32cSt). The oil contains surface active substances, which provide corrosion protection over a large temperature range. It also takes up condensation water (demulsifying). The 1-litre polyethylene bottle with volume scale has a practical filling hose, which can be pulled out after unscrewing the sealing cap.
Compressor Oil for piston compressor VDL 150 DD, DIN 51506
Air compressor oil for piston and rotary compressores according to DIN 510506 for compressor temperatures up to 220°C. This oil, based on mineral oil with a powerful dispersion and detergency capability prevents deposting of aging products and foreign objects. This has a strong resistance against corrosion through its condensed water absorbing qualities (demulsifying). Its positive resistance against oxidation provides safety against explosions.